update

frappe-installer

@@ -1,255 +0,0 @@
-#!/usr/bin/env bash
-
-set -euo pipefail
-IFS=$'\n\t'
-
-[[ -z "${DEBUG}" && "${DEBUG}" == 1 ]] && set -o xtrace
-
-__dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-cd "$__dir"
-
-env_url="https://raw.githubusercontent.com/frappe/frappe_docker/master/installation/env-example"
-docker_nginx_url="https://github.com/evertramos/docker-compose-letsencrypt-nginx-proxy-companion"
-frappe_docker_url="https://github.com/frappe/frappe_docker"
-env_file="$__dir/.env"
-
-function check_root() {
-  if [[ $EUID != 0 ]]; then
-    echo "This script must be run as root. Login as root or use sudo." >&2
-    exit 1
-  fi
-}
-
-function check_git() {
-  if [[ ! -x "$(command -v git)" ]]; then
-    echo "Git is not installed. Please install git before continuing." >&2
-    exit 1
-  fi
-}
-
-function check_docker() {
-  if [[ ! -x "$(command -v docker)" ]]; then
-    read -rp "No docker installation found. Press Enter to install docker or ctrl+c to exit." >&2
-    curl -fsSL https://get.docker.com | sh
-  fi
-  if [[ ! -x "$(command -v docker)" ]]; then
-    echo "Docker installation failed. Exiting." >&2
-    exit 1
-  fi
-}
-
-function check_env() {
-  if [[ ! -f "$env_file" ]]; then
-    cat <<CHOOSE >&2
-    No environment file found. This file is required for setting up Frappe/ERPNext Docker.
-    Would you like to fetch the default environment file?
-    (NOTE: You will be prompted to set it up later)
-CHOOSE
-    read -rp "Press Enter to fetch the configuration file, or create a .env file and re-run the script."
-    curl -fsSL "$env_url" -o "$env_file"
-  fi
-}
-
-function clone_repository() {
-  echo "Cloning Repository: $1"
-  git clone "$2"
-}
-
-function get_config() {
-  if [[ -n "$2" ]]; then
-    config_file="$2"
-  else
-    config_file="$env_file"
-  fi
-  line=$(grep -E "^$=" "$config_file")
-  line_result=$(echo "$line" | awk -F"=" '{print $2}')
-}
-
-function get_install_version() {
-  cat <<CHOOSE >&2
-  Choose a version you would like to setup [current: $1]:
-  1. develop (edge)
-  2. version-12
-  3. version-11
-  Please enter your choice [1-3]:
-CHOOSE
-  select choice in "1" "2" "3"; do
-    case ${choice} in
-      1) version="edge" ;;
-      2) version="version-12" ;;
-      3) version="version-11" ;;
-    esac
-  done
-}
-
-function prompt_config() {
-  # inspired by discourse_docker
-  get_config "VERSION"
-  local install_version=$line_result
-  get_config "MYSQL_ROOT_PASSWORD"
-  local mysql_password=$line_result
-  get_config "SITES"
-  local sites=$line_result
-  get_config "LETSENCRYPT_EMAIL"
-  local letsencrypt_email=$line_result
-
-  echo "Would you like to setup networking for docker? [y/n]"
-  echo "This is required if you wish to access the instance from other machines."
-  select choice in "y" "n"; do
-    case $choice in
-      y) setup_networking=1 ;;
-      n)
-        setup_networking=0
-        setup_letsencrypt=0
-        ;;
-    esac
-  done
-  if [[ -n "$letsencrypt_email" && "$setup_networking" -ne "0" ]]; then
-    echo "Would you like to setup LetsEncrypt? [y/n]"
-    select choice in "y" "n"; do
-      case $choice in
-        y)
-          setup_letsencrypt=1
-          echo "Please ensure that all the required domains point to this IP address."
-          read -rp "Enter an Email Address to setup LetsEncrypt with: " letsencrypt_email
-          ;;
-        n)
-          setup_letsencrypt=0
-          echo "Skipping LetsEncrypt Setup."
-          ;;
-      esac
-    done
-  fi
-
-  local new_value=""
-  local config_state="n"
-
-  echo
-
-  get_install_version "$install_version"
-  install_version="$version"
-
-  while [[ "$config_state" == "n" ]]; do
-    if [[ -n "$mysql_password" ]]; then
-      read -srp "Enter MySQL Password [$mysql_password]: " new_value
-      if [[ -n "$new_value" ]]; then
-        mysql_password="$new_value"
-      fi
-    fi
-
-    if [[ -n "$sites" ]]; then
-      read -rp "Enter sitename to setup [$sites]: " new_value
-      if [[ -n "$new_value" ]]; then
-        sites="$new_value"
-      fi
-    fi
-
-    if [[ "$setup_letsencrypt" != "0" ]]; then
-      read -rp "Enter email address for LetsEncrypt [$letsencrypt_email]: " new_value
-      if [[ -n "$new_value" ]]; then
-        letsencrypt_email=$new_value
-      fi
-    fi
-
-    echo "Current Configuration:"
-    echo "Version: $([[ "$install_version" == "edge" ]] && echo "develop" || echo "$install_version")"
-    echo "MySQL Root Password: $mysql_password"
-    echo "Sites: $sites"
-
-    if [[ "$setup_letsencrypt" != "0" ]]; then
-      echo "LetsEncrypt Email Address: $letsencrypt_email"
-    fi
-
-    echo
-    echo "Does this configuration look okay?"
-    read -rp "Press Enter to continue, 'n' to try again, or ctrl+c to exit: " config_state
-  done
-
-  echo "Saving the current configuration file to $env_file"
-
-  cat <<EOF >"$env_file"
-VERSION=$install_version
-MYSQL_ROOT_PASSWORD=$mysql_password
-SITES=$sites
-$([ "$setup_letsencrypt" -ne "0" ] && echo "LETSENCRYPT_EMAIL=$letsencrypt_email")
-EOF
-  setup_configuration=$(<"$env_file")
-}
-
-setup_user() {
-  echo "The rest of the setup requires a user account."
-  echo "You may use an existing account, or set up a new one right away."
-  read -rp "Enter username: " username
-  if grep -E "^$username" /etc/passwd >/dev/null; then
-    echo "User $username already exists."
-  else
-    read -rsp "Enter password: " password
-    password="$(perl -e 'print crypt($ARGV[0], "password")' "$password")"
-    if useradd -m -p "$password" "$username" -s "$(command -v bash)"; then
-      echo "User $username has been added to the system."
-    else
-      echo "Failed to add user to the system."
-      echo "Please add a user manually and re-run the script."
-      exit 1
-    fi
-  fi
-
-  if ! getent group docker >/dev/null 2>&1; then
-    echo "Creating group: docker"
-    groupadd docker
-  fi
-  echo "Adding user $username to group: docker"
-  usermod -aG docker "$username"
-  newgrp docker
-}
-
-install() {
-  if [[ "$setup_letsencrypt" != "0" && "$setup_networking" != "0" ]]; then
-    echo "Setting up NGINX Proxy for LetsEncrypt"
-    clone_repository "Docker Compose LetsEncrypt NGINX Proxy Companion" "$docker_nginx_url"
-    cd "$(basename "$docker_nginx_url")"
-    if [[ -f .env.sample ]]; then
-      cp .env.sample env
-    fi
-    ./start.sh >/dev/null 2>&1
-    cd "$(eval echo ~"$username")"
-  fi
-
-  echo "Setting up Frappe/ERPNext"
-  clone_repository "Frappe/ERPNext Docker" "$frappe_docker_url"
-  cd "$(basename "$frappe_docker_url")"
-  echo "$setup_configuration" >.env
-  echo "Enter a name for the project."
-  read -rp "This project name will be used to setup the docker instance: [erpnext_docker]" project_name
-  if [[ -z "$project_name" ]]; then
-    echo "Setting the project name to erpnext_docker"
-    project_name="erpnext_docker"
-  fi
-
-  docker-compose \
-    --project-name "$project_name" \
-    --project-directory . up -d \
-    -f installation/docker-compose-frappe.yml \
-    -f installation/docker-compose-erpnext.yml \
-    -f installation/docker-compose-common.yml \
-    "$( ((setup_networking == 1)) && printf %s '-f installation/docker-compose-networks.yml')"
-
-  get_config "SITES" "$(pwd)/.env"
-  local sites=$line_result
-
-  docker exec \
-    -e "SITE_NAME=$sites" \
-    -e "INSTALL_ERPNEXT=1" \
-    -it "$project_name"_erpnext-python_1 docker-entrypoint.sh new
-
-  echo "Installation Complete!"
-}
-
-check_root
-check_git
-check_docker
-check_env
-
-prompt_config
-setup_user
-install