# Test network - Nano bash

Test network Nano bash provides a set of minimal bash scripts to run a Fabric network on your local machine.
The network is functionally equivalent to the docker-based Test Network, you can therefore run all the tutorials and samples that target the Test Network with minimal changes.
The Fabric release binaries are utilized rather than using docker containers to avoid all unnecessary layers. And you can choose between running the chaincode and chaincode builder in a docker container behind the scenes or running the chaincode as a service without any containers at all.
Using the Fabric binaries also makes it simple for Fabric developers to iteratively and quickly modify Fabric code and test a Fabric network as a user.

As the name `nano` implies, the scripts provide the smallest minimal setup possible for a Fabric network while still offering a multi-node TLS-enabled network:
- Minimal set of dependencies
- Minimal requirements on Fabric version (any v2.x orderer and peer nodes should work)
- Minimal set of environment variable overrides of the default orderer orderer.yaml and peer core.yaml configurations
- Minimal scripting with minimal set of reference commands to get a Fabric network up and running
- Minimal channel configuration for an orderer organization (3 ordering nodes) and two peer organizations (with two peers each)
- Minimal endorsement policy to allow a single organization to approve and commit a chaincode (unlike Test Network which requires both organizations to endorse)

# Prereqs

- Follow the Fabric documentation for the [Prereqs](https://hyperledger-fabric.readthedocs.io/en/latest/prereqs.html)
- Follow the Fabric documentation for [downloading the Fabric samples and binaries](https://hyperledger-fabric.readthedocs.io/en/latest/install.html). You can skip the docker image downloads by using `./install-fabric.sh binary samples`

## To run the chaincode as a service
You need to configure the peer to use the `ccaas` external builder downloaded with the binaries above.
The path specified in the default config file is only valid within the peer container which you won't be using.
Edit the `fabric-samples/config/core.yaml` file and modify the `externalBuilders` field to point to the correct path.
The configuration should look something like the following:

```yaml
externalBuilders:
  - name: ccaas_builder
    path: /Users/nanofab/fabric-samples/builders/ccaas
    propagateEnvironment:
      - CHAINCODE_AS_A_SERVICE_BUILDER_CONFIG
```

If you have [yq](https://mikefarah.gitbook.io/yq/) installed, run the following command in the `fabric-samples` directory to update the configuration:

```shell
yq -i 'del(.chaincode.externalBuilders) | .chaincode.externalBuilders[0].name = "ccaas_builder" | .chaincode.externalBuilders[0].path = env(PWD) + "/builders/ccaas" | .chaincode.externalBuilders[0].propagateEnvironment[0] = "CHAINCODE_AS_A_SERVICE_BUILDER_CONFIG"' config/core.yaml
```

# Instructions for starting network
## Running each component separately

Open terminal windows for 3 ordering nodes or 4 if running BFT Consensus, 4 peer nodes, and 4 peer admins as seen in the following terminal setup. The first two peers and peer admins belong to Org1, the latter two peer and peer admins belong to Org2.
Note, you can start with two ordering nodes and a single Org1 peer node and single Org1 peer admin terminal if you would like to keep things even more minimal (two ordering nodes are required to achieve Raft consensus (2 of 3), while a single peer from Org1 can be utilized since the endorsement policy is set as any single organization).
![Terminal setup](terminal_setup.png)

The following instructions will have you run simple bash scripts that set environment variable overrides for a component and then runs the component.
The scripts contain only simple single-line commands so that they are easy to read and understand.
If you have trouble running bash scripts in your environment, you can just as easily copy and paste the individual commands from the script files instead of running the script files.

- cd to the `test-network-nano-bash` directory in each terminal window
- In the first orderer terminal, run `./generate_artifacts.sh` to generate crypto material (calls cryptogen) and application channel genesis block and configuration transactions (calls configtxgen). The artifacts will be created in the `crypto-config` and `channel-artifacts` directories. If you are running BFT consensus then run `./generate_artifacts.sh BFT`.
- In the three orderer terminals, run `./orderer1.sh`, `./orderer2.sh`, `./orderer3.sh` respectively. If you are running BFT consensus then run `./orderer4.sh` in the fourth orderer terminal also.
- In the four peer terminals, run `./peer1.sh`, `./peer2.sh`, `./peer3.sh`, `./peer4.sh` respectively.
- Note that each orderer and peer write their data (including their ledgers) to their own subdirectory under the `data` directory
- Open a different terminal and run `./join_orderers.sh`. If you are running BFT Consensus then run `./join_orderers.sh BFT` instead.
- In the four peer admin terminals, run `source peer1admin.sh && ./join_channel.sh`, `source peer2admin.sh && ./join_channel.sh`, `source peer3admin.sh && ./join_channel.sh`, `source peer4admin.sh && ./join_channel.sh` respectively.

Note the syntax of running the scripts. The peer admin scripts set the admin environment variables and must be run with the `source` command in order that the exported environment variables can be utilized by any subsequent user commands.

## Starting the network with one command

Using the individual scripts above gives you more control of the process of starting a Fabric network and demonstrates how all the required components fit together, however the same network can also be started using a single script for convenience.

For Raft consensus type:
```shell
./network.sh start
```

For BFT consensus type:
```shell
./network.sh start -o BFT
```

After the network has started, use separate terminals to run peer commands.
You will need to configure the peer environment for each new terminal.
For example to run against peer1, use:

```shell
source peer1admin.sh
```

# Instructions for deploying and running the basic asset transfer sample chaincode

To deploy and invoke the chaincode, utilize the peer1 admin terminal that you have created in the prior steps. You have two possibilities:

1. Using a chaincode container
2. Running the chaincode as a service
3. Using the k8s builder and minikube

For your convenience you can run `install&approve&commit_chaincode_peer1.sh` from peer1admin terminal to run basic chaincode as a container and activate it. The output of the script is redirected to the logs folder.

## 1. Using a chaincode container

Package and install the chaincode on peer1:

```shell
peer lifecycle chaincode package basic.tar.gz --path ../asset-transfer-basic/chaincode-go --lang golang --label basic_1

peer lifecycle chaincode install basic.tar.gz
```

The chaincode install may take a minute since the `fabric-ccenv` chaincode builder docker image will be downloaded if not already available on your machine.

Copy the returned chaincode package ID into a `CHAINCODE_ID` environment variable for use in subsequent commands, or better yet use the peer `calculatepackageid` command to set the environment variable:

```shell
export CHAINCODE_ID=$(peer lifecycle chaincode calculatepackageid basic.tar.gz) && echo $CHAINCODE_ID
```

## 2. Running the chaincode as a service

Package and install the external chaincode on peer1 with the following simple commands:

```shell
cd chaincode-external

tar cfz code.tar.gz connection.json
tar cfz external-chaincode.tgz metadata.json code.tar.gz

cd ..

peer lifecycle chaincode install chaincode-external/external-chaincode.tgz
```

Set the CHAINCODE_ID environment variable for use in subsequent commands:

```shell
export CHAINCODE_ID=$(peer lifecycle chaincode calculatepackageid chaincode-external/external-chaincode.tgz) && echo $CHAINCODE_ID
```

In another terminal, navigate to `fabric-samples/asset-transfer-basic/chaincode-typescript` and build the chaincode:

```shell
npm install
npm run build
```

Set the chaincode package ID again (this is a different terminal):

```shell
export CHAINCODE_ID=$(peer lifecycle chaincode calculatepackageid ../../test-network-nano-bash/chaincode-external/external-chaincode.tgz) && echo $CHAINCODE_ID
```

Set the chaincode server address:

```shell
export CHAINCODE_SERVER_ADDRESS=127.0.0.1:9999
```

And start the chaincode service:

```shell
npm run start:server-nontls
```

## 3. Using the k8s builder and minikube

It is also possible to launch chaincode in kubernetes pods using the k8s builder. A simple way to do this is using [minikube](https://minikube.sigs.k8s.io/docs/), which requires the chaincodeListenAddress and chaincodeAddress settings used by the Nano test network to be overridden using the following environment variables.

```shell
export CORE_PEER_CHAINCODEADDRESS_HOST_OVERRIDE=host.minikube.internal
export CORE_PEER_CHAINCODELISTENADDRESS_HOST_OVERRIDE=0.0.0.0
```

See the [fabric-builder-k8s](https://github.com/hyperledger-labs/fabric-builder-k8s) project for more details on how to configure and use the k8s builder.

## Activate the chaincode

Using the peer1 admin, approve and commit the chaincode (only a single approver is required based on the lifecycle endorsement policy of any organization):

```shell
peer lifecycle chaincode approveformyorg -o 127.0.0.1:6050 --channelID mychannel --name basic --version 1 --package-id $CHAINCODE_ID --sequence 1 --tls --cafile ${PWD}/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/ca.crt

peer lifecycle chaincode commit -o 127.0.0.1:6050 --channelID mychannel --name basic --version 1 --sequence 1 --tls --cafile "${PWD}"/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/ca.crt
```

**Note:** after following the instructions above, the chaincode will only be installed on peer1 and will only be available in the peer1admin shell.
Rerun the `peer lifecycle chaincode install` command in other peer admin shells to install it on the corresponding peer.
You will also need to rerun the `peer lifecycle chaincode approveformyorg` command to use the chaincode on peers in another organization, e.g. using the peer3admin shell.

## Interact with the chaincode

Invoke the chaincode to create an asset (only a single endorser is required based on the default endorsement policy of any organization).
Then query the asset, update it, and query again to see the resulting asset changes on the ledger. Note that you need to wait a bit for invoke transactions to complete.

```shell
peer chaincode invoke -o 127.0.0.1:6050 -C mychannel -n basic -c '{"Args":["CreateAsset","1","blue","35","tom","1000"]}' --waitForEvent --tls --cafile "${PWD}"/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/ca.crt

peer chaincode query -C mychannel -n basic -c '{"Args":["ReadAsset","1"]}'

peer chaincode invoke -o 127.0.0.1:6050 -C mychannel -n basic -c '{"Args":["UpdateAsset","1","blue","35","jerry","1000"]}' --waitForEvent --tls --cafile "${PWD}"/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/ca.crt

peer chaincode query -C mychannel -n basic -c '{"Args":["ReadAsset","1"]}'
```
For your convenience you can run `chaincode_interaction.sh` from peer1admin terminal to make this simple transaction. The output of the script is redirected to the logs folder.\
Congratulations, you have deployed a minimal Fabric network! Inspect the scripts if you would like to see the minimal set of commands that were required to deploy the network.

# Stopping the network

If you started the Fabric components individually, utilize `Ctrl-C` in the orderer and peer terminal windows to kill the orderer and peer processes. You can run the scripts again to restart the components with their existing data, or run `./generate_artifacts` again to clean up the existing artifacts and data if you would like to restart with a clean environment.

If you used the `network.sh` script, utilize `Ctrl-C` to kill the orderer and peer processes. You can restart the network with the existing data, or run `./network.sh clean` to remove old data before restarting.
